Step 3 Initializing The Software; For Use Under Windows 8, 7, Server 2008, Vista, Xp, Server 2003, 2000 - Contec COM-2PD(PCI)H User Manual

Step 3 Initializing the Software

This assigns COM ports to the serial ports on the board. You can also change a previously assigned
COM port number to a different number.
For use under Windows 8, 7, Server 2008, Vista, XP, Server 2003,
2000
On Windows 8, 7, Server 2008, Vista, XP, Server 2003, 2000, the COM ports are already assigned by the
hardware installation step. Run Device Manager as described below if you wish to view or modify the
COM port settings.
Start Device Manager
(1) Select "System" from "Control Panel" and start [Device Manager].
(2) Check that the new COM ports are displayed in the [Ports] folder.
COM-2PD(PCI)H, COM-4PD(PCI)H
* The name of the board
you have just added is
displayed.
- COM-2PD(PCI)H/COM-2PD(PCI)
- COM-4PD(PCI)H
2. Setup
25