Windows Server 2008, Windows Vista - Contec COM-2PD(PCI)H User Manual

2. Setup

Windows Server 2008, Windows Vista

(1) "Found New Hardware" wizard is open. Click "Locate and install driver software".
* The category of the board you
have just added is displayed.
- PCI Serial port
(2) When the "Found New Hardware" window is displayed, insert the accompanying CD-ROM "COM
Setup Disk" into the CD-ROM drive. After a while, the device installation process begins.
You have now finished installing the hardware.
22
COM-2PD(PCI)H, COM-4PD(PCI)H