Technical Manual Switch Actuators AMI/AMS
4.4 Switching output
The following parameters, which are described at the headings 4.4.x, are only available at channels
selected as switch.
4.4.1 Overview
By choosing a channel as switch, a sub menu, called Channel A Switching, appears for this channel at
the left drop down menu.
The sub menu is shown at the following illustration:
Figure 12: Switching output
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
20
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de