Set The Date And Time - wtw photoLab 6100 VIS Operating Manual

Commissioning
14

3.2.4 Set the date and time

During the initial commissioning, the instrument automatically guides you to
the setting of the time and date after the setting of the language.
Date/Time
Date
Time
Date/Time
Date
Time
Date
23 .10.2006
Date/Time
Date
Time
Time
: 22 : 09
10
After the initial commissioning, you can change the date and time in the
General setup / Date/Time menu at any time.
The Date/Time menu is open.
04/16/07 9:52
04/16/2007 Using <><>, select a menu
9:52:09
item and
confirm or open it with
<START·ENTER> .
1 Select and confirm Date.
The input field for the current date
pops up.
OK
2 Enter the current date with <0...9>
04/16/07 9:52
04/16/2007
and confirm.
9:52:09
The input field closes.
The date is accepted.
3 Select and confirm Time.
The input field for the current time
pops up.
OK
4 Enter the current time with <0...9>
04/16/07 9:52
04/16/2007
and confirm.
9:52:09
The input field closes.
The time is accepted.
OK
®
photoLab 6100 VIS
ba75849e06 06/2013