Handling Of Hazardous Substances - wtw photoLab 6100 VIS Operating Manual

Safety instructions
Safe operation
Safety datasheets
10
The smooth functioning and operational safety of the photometer can only be
guaranteed under the environmental conditions that are specified in chapter
7 T .
ECHNICAL DATA
If the photometer was transported from a cold environment to a warm
environment, the formation of condensate can lead to the faulty functioning
of the meter. In this event, wait until the temperature of the meter reaches
room temperature before putting the meter back into operation.
If safe operation is no longer possible, the photometer must be taken out of
operation and secured against inadvertent operation.
Safe operation is no longer possible if the photometer:
 has been damaged in transport
 has been stored under adverse conditions for a lengthy period of time
 is visibly damaged
 no longer operates as described in this manual.
If you are in any doubt, contact the supplier of your photometer.
2.4

Handling of hazardous substances

When developing test sets, WTW carefully sees that the tests can be carried
out as safely as possible. Some hazards by dangerous substances, however,
cannot always be avoided.
WARNING
Improper handling of certain reagents can cause damage to your
health.
In any case follow the safety labels on the packing and the safety
instructions of the package insert. Protective measures specified there
have to be followed exactly.
The safety datasheets of the chemicals comprise all instructions on safe
handling, occurring hazards, preventive actions and actions to take in
hazardous situations. Follow these instructions in order to work safely.
®
photoLab 6100 VIS
ba75849e06 06/2013