Measuring In Concentration Mode; Measuring Cell Tests With Barcode - wtw photoLab 6100 VIS Operating Manual

Operation
26
4.4

Measuring in Concentration mode

4.4.1

Measuring cell tests with barcode

<HOME>
Concentration
Concentration
Please select method for measuring
or insert a barcoded cell
or insert AutoSelector.
Setup
Method list Last method
Line mark
Concentration
49
18: C3/25
16 mm
Setup Method list Citation form
Inserting a cell with barcode starts
04/16/07 9:52
a measurement.
If a cell without barcode is used:
Select a method.
New Method
1 Open the cell shaft cover.
Barcode
2 Close the inner turn-up lid.
If the inner turn-up lid is opened
too wide, a message prompts you
to close the inner turn-up lid.
3 Insert the barcoded round cell in
the round cell shaft so it touches
the bottom. When doing so, align
the line mark with the notch at the
front of the round cell shaft.
The photometer selects the
method with the aid of the barcode
and starts measuring
automatically.
4 Further options:
04/16/07 9:52
– Select a different citation form
mg/l
– Select a different measuring
COD
10 - 150 mg/l
– Make further settings such as
Unit
photoLab
with [Citation form],
(e.g. NH <–> NH -N).
4 4
unit with [Unit],
(e.g. mg/l <–> mmol/l).
dilution or blank value
measurements with [Setup].
ba75849e06
®
6100 VIS
06/2013