Utilities For Printouts Or Data Transfer; Data Output Parameter; Data Output In Defined Intervals; Data Id Codes - Sartorius BA 210 S Installation And Operating Instructions Manual

Utilities for Printouts or Data Transfer:

Sartorius Balances come Standard with an interface.
You can plug a Sartorius Printer or a Computer into this interface port to print data on hard copy or transfer
them to your Computer. Moreover, you can choose to Output data from your balance to this on-line device
either automatically or by pressing the print key on the balance.
The balance operating menu lets you define the various parameters for data Output.
For information on the data formats and for interfacing a Computer or a different peripheral device, see "In-
terface Description."

Data Output Parameter

This parameter is coupled with or without the stability parameter = stable readout or no motion is detected
Print on request = data is Output only when the print key is pressed or a Software command is received
Auto print = continuous, automatic data output
Print on request regardless of stability
Print on request after stability with storage of the
function
Print on request after stability without storage of the
function
Auto print regardless of stability
Auto print at stability

Data Output in Defined Intervals

You can reduce the volume of data in the "auto print" mode by defining the interval at which data will be Out-
put automatically. This auto print interval is based on the number of times the display is updated.
Auto print interval
1 display update
2 display updates

Data ID Codes

An "N" printed or displayed before a weight identifies it as a net weight.
This ID code increases the data output format for each value from 16 to 22 characters.
ID code for data output
Without
With
* = factory setting, depends on balance model in some cases
Code
6 1 1
6 1 2 *
6 1 3
6 1 4
6 1 5
Code
6 3 1 *
6 3 2
Code
7 2 1 *
7 2 2
Changes
Changes
Changes
25