Utilities For Printouts Or Data Transfer - Sartorius mc1 Installation And Operating Instructions Manual

Utilities for Printouts or Data Transfer

Sartorius MC1 Balances come Standard with an interface.
You can plug a Sartorius Printer or a Computer into this interface port to print data on hard copy or transfer them to your
Computer. Moreover, you can choose to Output data from your balance to this on-line device either automatically or by
pressing the print key on the balance.
The balance operating menu lets you define the various parameters for data output.
For information on the data formats and for interfacing a Computer or a different peripheral device, see "Part V: Interface
Description."
Data Output Parameter
This parameter is coupled with or without the stability parameter = stable readout or no motion is detected
Print on request = data is output only when the print key is pressed or a Software command is received
Auto print = continuities. automatic data output
Print on request regardless of stability
Print on request after stability with storage of the function
Print on request after stability without storage of the function
Auto print regardless of stability
Auto print at stability
Automatic Data Output
You can stop and Start automatic data output by pressing the print key. To avoid operating errors or to ensure that data will be
output continuously in the automatic mode, you can block this function
Start/stop auto print using the print key
Auto print not stoppable
* = Factory setting
20
Code
6 1
* 6 1
6 1
6 1
6 1
Code
6 2
* 6 2
1
2
3
4
5
1
2