Sartorius BA 210 S Installation And Operating Instructions Manual page 27

press the CAL key until "8" appears
-
press the key until the third digit of the code appears (here,
-
the current code setting always appears)
- use the CAL key to change the right-hand number to "2"
- confirm the code setting You must press the tare control (15) to
confirm the code you have just set (this is indicated by "o" after
the code).
key to move to the left digit
- use the
- press the tare control (15) to store the menu code setting
Important Note
The changed code will not be stored if you turn off the balance with
the ON/OFF key during the setting procedure, or before storing the
menu code.
27