Available Tethered Scanners
The tethered bar code scanner normally attaches to your
computer at the 9-pin D-sub connector COM1. When the
scanning application is installed, the computer provides the
power (5 volts dc) to operate the scanner. Your computer
supports specific Intermec scanners, plus the following
Symbol and PSC scanners, which are available under the
Part Numbers shown:
Symbol Scanners
"
"
"
PSC Scanners
"
"
"
"
"
"
"
"
Straight screw-on connector serial cable 321-518-001
LS-3203ER-I200A, Extended Range part number
858-042-800
LS-3603-I200A Fuzzy Logic part number 858-079-901
Straight screw-on connector serial cable 321-476-082
PSC5300 IP Series Standard Range part number
858-065-012
PSC5300 IP Series VIN part number 858-065-022
PSC5300 IP Series Long Range part number
858-065-052
PSC5300 IP Series Extra Long Range part number
858-065-072
PSC5300 IP Series Ultra Long Range part number
858-065-092
PSC5300 IP Series Long Range High Power part num-
ber 858-065-152
PSC5300 IP Series Extra Long Range High Power
part number 858-065-172
5055 Data Collection PC User's Guide
SECTION 2
Operation
"
2-19