Radio Installation; Internal Antenna Cable Installation - Intermec 5055 User Manual

SECTION 2 Operation
"

Radio Installation

When installing a PC card radio module, you must install
the following items before the radio can operate properly:
"
"
"
"
"
The following pages provide illustrated installation instruc-
tions for each of those components. Install each component
in the order these instructions are presented.

Internal Antenna Cable Installation

Typically, the radio PC card module comes with the internal
antenna cable attached to it. The free end is a threaded
connector which must be installed in the antenna connector
panel. Refer to Figure 2-2, item #4 for an example of how
this cable is routed and installed. Follow the instructions
below to install connectors in the drive bay cover. It is as-
sumed that the PC card radio module has just been
installed in the computer and the drive bay cover has not
been reinstalled.
1. Choose a mounting hole in the antenna connector pan-
2. Remove the plug from that hole in the antenna con-
3. Slip the threaded connector through the hole.
4. Place a shaker type washer onto the connector.
5. Thread a nut onto the connector. Tighten securely.
6. Reinstall the antenna connector panel.
2-8 5055 Data Collection PC User's Guide
The internal antenna cable and connector.
The external antenna cable and connector.
The cover for the external antenna cable channel.
The antenna adapter bracket.
The antenna(s).
el that allows you to dress the cable to its full length.
nector panel.
Take care NOT to overtighten the nut to prevent
breaking the connector.