Antenna Bracket Installation - Intermec 5055 User Manual

SECTION 2 Operation
"

Antenna Bracket Installation

Position the antenna and bracket assembly as shown below.
Install this assembly using the Phillips screws provided
with the mounting bracket kit. Make sure all screws are
tightened securely.
B CAUTION:
Dress antenna cables within the channel and the antenna
mounting bracket with care to guard against pinching or
damaging the cables. Damaged or pinched cables can diminish
or prevent radio transmission and reception performance.
2-12 5055 Data Collection PC User's Guide
Figure 2-8
Antenna and Bracket Assembly
(Installed)