PC (PCMCIA) Cards
This computer allows the use of PCMCIA Type II and Type
III PC Cards. Instructions for installing PC cards are pro-
vided earlier in this section.
Removing PC Cards
To remove a PC Card, follow these steps:
1. Remove the antenna connector panel.
2. Determine which PC Card you want to remove.
3. Press inward on the ejector to release the PC Card.
4. Grasp the edge of the card to remove it.
5. Reinstall the panel that you removed in Step 1.
2
1. PC card ejector
2. Hard drive release (lift up, then pull out)
Figure 2-11
Drive and PC Card Removal
5055 Data Collection PC User's Guide
SECTION 2
Operation
"
1
1
2-15