Connector Area; Rear Side; Menu Displays For Video Out Output - Panasonic AG-EC4G Operating Instructions Manual

Parts and their functions
32.FILTER INDICATOR
This lights when the filter position is shown on the 30.
Number display LED.
33.GAIN INDICATOR
This lights when the gain value is shown on the 30.
Number display LED.
34.SHUTTER INDICATOR
This is lit when the shutter is displayed on the 30.
Number display LED.
35.SHUTTER SPEED INDICATOR
When displaying the shutter in 30. Number display
LED, the displayed format can be distinguished with
the ON/OFF.
Shutter speed is displayed. The ¢¢¢¢ part of
ON:
the shutter speed value 1/¢¢¢¢ is displayed
in the 30. Number display LED.
OFF: Shutter angle is displayed.

Connector area

1
1. CAM/BS connector
This is used to connect the unit with the camera
recorder or basestation (AJ-BS300, option).
Pin No.
2. VIDEO OUT connector
Video signal output from the camera recorder is output
without modification.

Menu displays for VIDEO OUT output

Settings menu is displayed in the VIDEO OUT terminal when the MENU switch is set to ON, and CHARACTER button is
turned ON.
This menu screen is characters superimposed on the composite signal of the camera recorder.
E-6
(Continued)
2
Signal
1 CAM DATA (H)
2 CAM DATA (C)
3 CAM CONT (H)
4 CAM CONT (L)
5 ECU_ON
6 Video input
7 GND (Video)
8 Standby
9 +12 V (IN)
10 GND

Rear Side

CAM/BS
1. Frequency charateristic adjustment knob
This is used to adjust the frequency characteristic of
the video signal.
2. Level adjustment knob
This will adjust the level of the video signal.
<Note>
When performing adjustment with the above knobs,
remove the rear cover, and adjust by inserting a small
screwdriver etc.
1
2
VIDEO OUT