Argon 18 KRYPTON GF 273A Assembly Manual page 14

KRYPTON GF 273A & KRYPTON CS 273B: 9. Console / D. Mechanical groupset
1. With the rear brake housing coming from
the back of the bike, guide the end of the
housing through the opening of the console.
2. Use the brake housing to insert the foam
liner around the brake housing.
3. Insert the Di2 wire from the external
junction box A through the hole in the
mechanical console cap.
4. Secure the Di2 wire into the Di2 external
insert.
5. Secure the brake housing into the Di2
external insert.
6. Secure the Di2 external insert into the
console cap.
7. Fix with the provided screws the console
cap on the frame.
Front derailleur
housing
Rear derailleur
housing
9
8
1
Rear brake
housing
13