Frameset Inspection - Argon 18 KRYPTON GF 273A Assembly Manual

KRYPTON GF 273A & KRYPTON CS 273B: 3. Frameset Inspection
BEFORE ASSEMBLING YOUR NEW KRYPTON CS /GF, MAKE SURE THAT YOU HAVE ALL THE FOLLOWING:
1. Frameset parts checklist (see p.29-30)
2. Inspect the frame for cosmetic aspect (scratches, bumps, cracks, paint defect, etc.)
3. For reference, check serial number and write it on p.2
4. All the necessary bolts (refer to Frameset Parts, p.29-30)
5. For optimal shifting performance, use a dropout alignment gauge to make sure that the drive-side dropout is straight
IMPORTANT:
The following parts are assembled on the frame. When assembling the bike, you will need to adjust these parts
according to their torque specifications when necessary.
Parts installed on frame
1 Front derailleur hanger
2 Chain suck guard
3 Seatpost Collar
4 Seatpost head
5 Water bottle cage screws
6 Removable CS cable stopper
7 Rear derailleur hanger
8 Small chain catcher
9 Headset cap screw
10 Console cap screw
Description Screw type
Riveted -
Glued -
M5 Screw (1x) Socket head
M5 Screws (2x) Socket head
M5 Screws (4x) Socket head
M3 Screws (2x) Flat head
M4 Screw (1x) Flat head
M5 Screw (1x) Socket head
M4 Screw (1x) Flat head
M4 Screws (2x) Flat head
Torque Nm Detail
- -
- -
4Nm Grease
4.5Nm Grease
3Nm Grease
1.0 -1.5Nm Grease
2Nm Loctite
3Nm Nylok
0.5-1.0Nm Dry
0.5-1.0Nm Dry
4