Argon 18 KRYPTON GF 273A Assembly Manual page 12

KRYPTON GF 273A & KRYPTON CS 273B: 9. Console /
B. Di2 external junction box groupset
1. With the rear brake housing coming from
the back of the bike, guide the end of the
housing through the opening of the console.
2. Use the brake housing to insert the foam
liner around the brake housing.
3. Insert the Di2 wire from the external
junction box A through the hole in the
9
mechanical console cap.
4. Secure the Di2 wire into the Di2 external
insert.
5. Secure the brake housing into the Di2
external insert.
6. Secure the Di2 external insert into the
8
console cap.
7. Fix with the provided screws the console
1
cap on the frame.
Di2 wire
Rear brake housing
11