Table of Contents
Advertisement
KRYPTON GF 273A & KRYPTON CS 273B: 4. Troubleshooting / Tip / Specification
Brakes
Use only flat mount hydraulic disc brakes. The frame and fork are
compatible with either 140mm or 160mm disc rotors. Adapters might be
required, consult brake manufacturer.
• Rear mount thickness: 25mm
Tire Clearance
The biggest tires that can be installed must be no wider than 32mm for
the rear and front wheel. If fenders are installed, the tires must be no wider
than 28mm
Seat Post
27.2mm
Seat Post Clamp
31.8mm
Bottom Bracket
BB86 (Press-fit)
Headset
FSA No 30 + 3D Press-fit (Bearing 1 1/8", 36°x45° top and 1 1/2" ,
36°x45° bottom + FSA TH-881-1 Compressor included)
No more than 30mm of spacer can be place between the stem and
the top cap of the 3D system. And the use of more than 5mm spacer
on top of the stem could void the efficiency of the compressor. These
practices will automatically cancel any warranty claim against the
manufacturer.
Headset cap:
When uninstalling the headset cap, you
need to first loosen the headset cap,
remove the HS cap screw and remove
the fork from the frame. Then you need
to pinch the rear section the headset
cap and lift the rear section upward.
This will release the headset cap from
the frame.
5
Hide quick links:
Advertisement
Table of Contents
