Download
Share
Print this page
Argon 18 KRYPTON 212A Assembly Manual
  1. Manuals
  2. Brands
  3. Argon 18 Manuals
  4. Bicycle
  5. KRYPTON 212A
  6. Assembly manual

Argon 18 KRYPTON 212A Assembly Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
KRYPTON 212A/212B: ASSEMBLY GUIDE
Revision 5.0 - 05-23-2017

Advertisement

loading

Related Manuals for Argon 18 KRYPTON 212A

Summary of Contents for Argon 18 KRYPTON 212A

  • Page 1 KRYPTON 212A/212B: ASSEMBLY GUIDE Revision 5.0 - 05-23-2017...

  • Page 2: Table Of Contents

    7. Parts’ SKUs and Descriptions ......16 For the warranty to be valid, the bicycle must be fully assembled by an authorized Argon 18 dealer. High end components, particularly carbon parts, need extra care when assembled.

  • Page 3: Assembly Overview

    KRYPTON 212A/212B: Assembly overview 1. Frame inspection 2. Headset installation 3. Cable housing installation IMPORTANT NOTICE: It is easier to install the cables and cable housings before the bearings. 4. Electronic drive-train cable 5. Seatpost adjustment 6. Derailleur hanger adjustment...
  • Page 4 KRYPTON 212A/212B: 1. Frame inspection When assembling a new frame, be sure to check if the following parts are assembled correctly. Parts installed on the frame Description Screw Tork Detail type Seatpost, Ø 27.2mm Seatpost Carbon paste Front derailleur hanger...
  • Page 5 KRYPTON 212A/212B: 2. Headset installation Install the 3D headset (6) according to the pressfit assembly guide. You can choose from 3 different heights: 25mm, 15mm or 0mm.
  • Page 6 KRYPTON 212A/212B: 3. Cable housing installation Install the front and rear derailleur cable starting at the top of the down tube. For the derailleur and brakes cable, brake and speed adjustment measure a sufficient lenght of housing to be able to turn the handlebar both ways correctly.

  • Page 7: Cable Housing Installation

    KRYPTON 212A/212B: 3. Cable housing installation (continued) Rear brake cable housing Remove the 2 cable stopper near the head tube and seat collar. Font section: Measure the necessairy cable housing to ensure proper rotation of the handlebar. Insert the cable through the shifter, than insert the cable housing in the top tube.
  • Page 8 KRYPTON 212A/212B: 3. Cable housing installation (continued) Front and rear derailleur: Pass the two cables inside the frame starting at the top tube until they comes out under the bottom bracket. Pass both cables into the cable guide (4d). Make sure the 5mm screw is set to 1.5 Nm.

  • Page 9: Electronic Drive-Train Specification

    KRYPTON 212A/212B: 4. Electronic drive-train specification The Di2 cable routing can be achieved easily using this simple trick: use a brake cable and a metal cable end to fix the Di2 cable. For more information on Shimano Di2 electronic system installation, go to: http://si.shimano.com.
  • Page 10 KRYPTON 212A/212B: 4. Electronic drive-train specification Use the proper grommet on the downtube to fix the cable correctly, depending if you us the mechanical (4h) or electronic (5b-5c) drive-train.
  • Page 11 KRYPTON 212A/212B: 4. Electronic drive-train specification Use the proper grommet/cable stopper for the rear derailleur (depending if you use mechanical or electronic drive-train). In a Di2 configuration, remove the cable stopper and replace the 2 scews to avoid empty holes on the frame. The Di2 cable...
  • Page 12 KRYPTON 212A/212B: 4. Electronic drive-train specification In a mechanical configuration, use the provided cable guide pipe (4f) for the front derailleur. For an electronic drive-train configuration, remove the cable guide pipe and use the proper grommet (5a) to fix the cable correctly.
  • Page 13 KRYPTON 212A/212B: 4. Electronic drive-train specification The Di2 battery is hidden in the seatpost, use the 2 battery holder (8) to fix the battery correctly. Apply a slight amount of grease on both parts. GREASE...

  • Page 14: Saddle Adjustment

    KRYPTON 212A/212B: 5. Saddle adjustment 9.1 Install the saddle on the rocker (3f) and tighten the rail clamp (3g) using the screw (3d) 9.2 Adjust the angle, the offset of the saddle and tighten the bolt (3b). GREASE 9.3 The rocker and the rail clamp (3f- 3g) can be flipped to change the saddle offset.
  • Page 15 KRYPTON 212A/212B: 5. Saddle adjustment Seat clamp offset (5mm) by flipping the rail clamp (3g) and rocker (3f).

  • Page 16: Derailleur Hanger Adjustment

    KRYPTON 212A/212B: 6. Derailleur hanger adjustment The front derailleur hanger can be adjusted according to the front derailleur angle to optain an equal curve between the derailleur and the LOCTITE big chain ring. Once at the right angle, use blue 242 Loctite and screw in at 6Nm.

  • Page 17: Parts' Skus And Descriptions

    KRYPTON 212A/212B: 7. Parts’ SKUs and Descriptions 80096 36197 37830 SP.KRYBLK.212B SP.KRYWHT.212A 38891 38234 38446 36682 38258 38260 38257 38256 38892 38756 38893 FK.KRYBLK.212B FK.KRYWHT.212A Images are for reference only. Proportions are not accurate.
  • Page 18 KRYPTON 212A/212B: 7. Parts’ SKUs and Descriptions* Name Assembled on A18 SKU# Parts already assembled Rear Derailleur Hanger Frame 37830 Front Derailleur Hanger Frame 36197 BB Cable Guide (incl. screw) Frame 38257 Bottle Cage Screws Frame 38234 BB Cable Guide Pipe...

This manual is also suitable for:

Krypton 212b