Headset Installation - Argon 18 KRYPTON GF 273A Assembly Manual

KRYPTON GF 273A & KRYPTON CS 273B: 8. Headset Installation
0mm 15mm
Like on almost all Argon 18 you will benefit of the 3D system, on the Krypton
CS and GF you can benefit of 3 positions, 0mm, 15mm and 30mm
30mm
Step of assembly
1. Insert the headset plastic
sleeve into the top on the
headtube. (apply grease)
2. Insert the required headset
column, 0, 15 or 30mm, in the
headset plastic sleeve. (apply
grease)
3. Insert bottom bearing on the
fork.
4. Slide the fork in the head
tube of the frame.
5. Install top bearing in the
headset column. (apply grease)
6. Install conical compressor
ring.
7. Install stack compressor.
8. Apply grease on the headset
seal to avoid any noise.
9. Install the corresponding
headset cap to complete the
assembly.
10. Fix the cap with the M4 flat
head screw.
9