Argon 18 KRYPTON GF 273A Assembly Manual page 8

KRYPTON GF 273A & KRYPTON CS 273B: 6. Seat Post Assembly
b
The seat post is supplied fully assembled. It's equipped with a spring-loaded
head for easy installation of the saddle.
• Unscrew both bolts slightly until the top clamp (b) and the cradle (c) are
separated enough to insert the saddle rail. Do not unscrew the bolts completely.
• Screw both bolts in order to adjust the angle of the saddle and clamp the rail.
• Tighten the bolt at 4.5 Nm.
c
The top clamp (b) and the cradle (c) can be flipped to change the saddle offset
between 25 or 15mm.
4.5 Nm 25mm offset. 15mm offset.
7