Argon 18 KRYPTON GF 273A Assembly Manual page 11

KRYPTON GF 273A & KRYPTON CS 273B: 9. Console /
A. Di2 internal junction box groupset
The console is the central point of the cable
and housing routing. Depending of the type
of assembly you will have to select the correct
assembly.
Tip: No mater the type of assembly you will
choose, always pass the brake housing first
starting from the back of the bike to the front.
3
1. With the rear brake housing coming
from the back of the bike, guide the end of
the housing through the right side of the
rectangular opening of the Di2 console cap (3).
2. Use the brake housing to insert the foam
line into the downtube.
3. Guide the Di2 cable coming from the
shifters through the grommet (4) and into the
rectangular opening of the console.
4. Guide the bake housing to the bigger hole
of the grommet (4).
5. Guide the Di2 cable coming from the
shifters through the grommet (4) and into the
rectangular opening of the console.
5
6. Fix the grommet on the console.
7. Place the Di2 O-Ring (5) around the
Shimano EW-RS910 junction box. Rear brake
housing
8. Connect the front and rear Di2 cable to the
4
Shimano EW-RS910 junction box.
9. Clip the Shimano EW-RS910 junction box
on the console cap (3).
10. Fix the console cap to the downtube of
the frame with the screws.
Di2 wire
10