Figure 5-7 Remote View Flow Diagrams (Rvfd); Figure 5-8 Dynamic (Comprehensive) Block By Series - Toshiba RemotEye 4 User Manual

Pre-Charge Mode Gate-Check Mode
Shutdown Mode

Figure 5-7 Remote View Flow Diagrams (RVFD)

Click on each Icon in the RVFD to display the parameters for that section of the UPS in the Dynamic Block widget.
Comprehensive: (Dynamic Block) This widget displays the dynamic data from the RVFD. Clicking an icon on the
RVFD will cause only those parameters to be displayed. Otherwise the summary parameters are displayed. This
widget cannot be replaced.
1600XP/XPi 4300 4400/5000 G9000 T1000

Figure 5-8 Dynamic (Comprehensive) Block by Series

UPS Identification: This widget displays the UPS Manufacturer, UPS Typeform (Specific model number), UPS
Serial Number, and UPS System Name assigned by the user. This information is constant. This widget cannot be
replaced.
History/Trend Block: This block can only be set to display either the History Graph or Trend Graph. This block
cannot be replaced.
History Block – (Default) The time can be controlled by the user by entering the Start-Date and End-Date. The
graph will display any and all of the parameters selected from the parameter list above the Start/Stop Date line. The
parameters include Input Voltage, Input frequency, Output Voltage, Output Frequency and Output Current.
Tracking of any of the parameters can be turned off by clicking the selection name.
Trend Block – The Trend Block displays the current values from the parameter list and updates per the user-selected
sampling rate.
RemotEye 4 User Manual – 90988-007
41