Hardware Setup; 12 Specifications; System Specifications; Table 12-1 Remoteye 4 System Specifications - Toshiba RemotEye 4 User Manual

3) Press the Edit button and enter administrator login credentials.
4) Press the Acquire button and select the config file destination.
Load Config file to RemotEye 4:
1) Discover or Manually add the RemotEye 4 to the list.
2) Select the check box of the RemotEye 4 to load the config file.
3) Press the Edit button and enter administrator login credentials.
4) Press the Open file button and select the config file to be uploaded.
5) Press the Upgrade Firmware button to upload the selected config file.
11.5.2

Hardware Setup

RemotEye 4 upgrade is accomplished through a network link. Follow these steps to setup the hardware for
RemotEye 4 upgrade:
Verify network cable connection to NETWORK port of RemotEye 4.
Verify active link to LAN or Network.
For further information on the network connection, refer to page 32.
Note: The Tupgrade Firmware Tool is only compatible with Windows operating systems.

12 SPECIFICATIONS

SYSTEM SPECIFICATIONS

Description
Network
RTC
Display Reset Switch
Hardware Reset Switch
Serial Port
Network LEDs
EMD LEDs
USB
MODBUS Board
Power Input DC
Power Consumption
Operating Environment
Firmware Upgrading
Dimension
Board Assembly
Network Delivery Requirement
Environment Port (EMD)
106

Table 12-1 RemotEye 4 System Specifications

Specification
Auto‐sense 10/100 Mbps Fast Ethernet
RJ45 LAN Connector
Battery backup RTC
Press 1 second – Restart RemotEye 4 display
Reset all RemotEye 4 parameters (including USER and PASSWORD ID) to
default settings.
RJ45 Connector for EMD Device x 1
UPS – Gold finger ( TXD,RXD/RS‐232 Level) x 1
Green – Power
Yellow – Status
Green – 100 LAN
Yellow – 10 LAN
USB‐A: Host/Network USB‐B: Device, mini USB for Console* 1
*Support RS485 (for SKU#2 )
+5.3V ~ 16V w/o USB(Host) +7.5V ~ 16V w/ USB(Host)
3.0 Watts Max. w/o USB(Host)
6.0 Watts Max. w/ USB(Host)
Temperature: ‐4°F – 140°F (‐20°C – 60°C)
Humidity: 10 ~ 80 %
Network Upgrade
65.8(L) x 60.0(W) x19.9(H)mm
(1) SKU#1: Main (2) SKU#2: Main + Sub Modbus Board
100m CAT.5/Packets size: 65500 bytes/1% packets loss
1 port for the Environmental Monitoring Device (EMD: temperature and
RemotEye 4 User Manual – 90988-007