Set The Ip Address; Figure 4-3 Tera Term Opening Screen; Figure 4-4 Serial Port Setup - Toshiba RemotEye 4 User Manual

4. Click on each drop-down box as necessary to
adjust the serial port settings.
5. Set the COM port parameters for:
Port: (COM port for SPEAr)
Baud rate: 9600
Data:
Parity:
Stop:
Flow control:
Transmit Delay:
Click on the "OK" button.
6.
7. Set the RemotEye 4 IP Address for the target
network. See Section 4.2.3
Address.
4.2.4

Set the IP Address

1. Install the Driver
2. Connect the USB to mini-USB adapter cable provided in the RemotEye 4 package.
3. Load and start a hyperterminal (Tera Term)
4. Look for the SPEAr COM Port number.
5. Click OK
6. Set the COM port for SPEAr to the following settings:

Baud

Data

Parity

Stop bit

Flow Control
7. Login. (The default Log in values are: User: TOSHIBA, Password: ADMIN)
8. The RemotEye 4 Configuration Utility main menu will be displayed. See Figure 4-5.
34

Figure 4-3 Tera Term Opening Screen

8 Bit
none
1 bit
none
0
Set the IP
9600 baud
8 bit
None
1 bit
None

Figure 4-4 Serial Port Setup

RemotEye 4 User Manual – 90988-007