Remoteye 4 Layout And Led Indicators; Figure 2-1 Remoteye 4 Faceplate Layout; Table 2-1 Remoteye 4 Connections - Toshiba RemotEye 4 User Manual

REMOTEYE 4 LAYOUT AND LED INDICATORS

No. Item
1 Network port
2 EMD
3 USB A port
4 RS-485 port
5 Setup port (mini-USB)
6 Restart button (Access
through faceplate)
7 Hard Reset button
(Behind faceplate)
RemotEye 4 User Manual – 90988-007
1 2
6

Figure 2-1 RemotEye 4 Faceplate Layout

Table 2-1 RemotEye 4 Connections

Description
Connects to network.
LED indication: LAN 10/100 link, Activity.
Connects to an environmental sensor (EMD)
LED indication: System power, System status.
Expansion slot.
Phoenix connector for RS-485 serial connections.
Connects to a workstation USB A port with the provided USB adapter cable.
Restarts RemotEye 4 display only. (Does not restart the UPS) (The Restart button
is behind faceplate, under the network port. It can be accessed with a thin probe
inserted through the "Restart" port.)

Press 1 second – Restart RemotEye 4
(This does not affect the operation of UPS.)
The Hard Reset button is located behind the RemotEye 4 faceplate, beneath the
USB port. Remove the faceplate to access the Hard Reset button.

With the faceplate removed and the PCB installed, press and hold the
Hard Reset button for at least 10 seconds.
This will restore the RemotEye 4 parameters to their default values,
including the Username (TOSHIBA) and Password (ADMIN)
See 2.5.1 Hard Reset Button for instructions on accessing the Hard Reset button.
3
4
5
(7)
17