Chapter 3 Starting up
Fitting and removing a module
Fitting and removing a module
Fitting a module
1
Turn the instrument face down on the work surface.
2
Set the two notches on the module part (1a) into the two holes
provided for that purpose on the Base (1b).
3
Make flush the 2 connections (2a & 2b), on module and base.
4
Once positioned, fix the module to the base screwing the 2 screws
(3a) fixing the receptacle.
14
The 2000 Platform must be switched off, and if it is
operating on the mains, its supply cable must be
unplugged.
User Manual
79000000203 Rev. 005