Chapter 10 File management
Working with directories and files from the explorer
Transferring files to/from a PC with a FTP server
Il is possible, from a PC, to access the internal memory of the 2000 Plat-
form or to the USB memory stick connected to the Platform by means of
the FTP server of the 2000 Platform.
Direct connection
1
Connect directly the 2000 Platform to the PC with an Ethernet cable,
using the RJ45 connectors on each equipment.
Figure 46
1
Make sure the network configuration onto the PC is set to the
Dynamic mode:
a
b
c
d
e
f
g
98
Ethernet Connection 2000 Platform <-> PC
Click on Start > Control Panel.
Double click on Network Connection.
Double click on Local Area Connection.
In the dialog box, click on Properties.
Check the parameter Internet Protocol (TCP/IP) is selected
( ) and click once on it (underlined in blue)
Click on Properties button.
On the tab General, check the parameter Obtain an IP address
automatically is selected ( ); if not, click to select it.
User Manual
79000000203 Rev. 005