Creating The Report - Viavi MTS 2000 User Manual

Chapter 10 File management
Creating a report

Creating the report

1 Open the file to be saved in a report in JPG, PNG or PDF format
2 If necessary, make the modifications on the file/trace (see user
manual of the 2100 OTDR Modules for OTDR trace files).
3 Set the trace view as wished.
For OTDR traces
– if the function is set to the Trace mode (Trace is selected on the
menu key Trace/Table/Summary), the JPG/PNG/PDF file will
contain the header and the trace (in one page).
– If the function is set to Table mode (Table is selected on the menu
key Trace/Table/Summary), the JPG/PNG/PDF file will contain the
header, the trace and the entire results table (several pages may be
required)
– If the function is set to Summary mode (Summary is selected on
the menu key Trace/Table/Summary), the JPG/PNG/PDF file will
contain the header and the summary page, with either the Bend
table or the Alarm Table according to the selected item with the
menu key.
This view is only available with OTDR traces.
4 Press simultaneously the left and right arrow keys
seconds
or
Click on the upper banner of the screen and, in the virtual control
buttons bar, press Export key
The icon
5 Press the
The files are saved in the directory Print, on the disk media storage.
104
displays until the end of process.
key to find the JPG, PNG or PDF file in the Explorer
F
ILE
User Manual 79000000203 Rev. 005
for about 5