Input Connector And Plug - Brocade Communications Systems FastIron GS Hardware Installation Manual

TABLE 21
Model
FGS624-STK power drawn from outlet with 1 power supply
with 2 CX4+1XFP
FGS648-STK power drawn from outlet with 1 power supply
with 2 CX4
FGS624-STK power drawn from outlet with 2 power supplies (PS
efficiency goes down as load increases)
with 2CX4+1XFP
FGS648-STK power drawn from outlet with 2 power supplies (PS
efficiency goes down as load decreases)
with 2 CX4

Input connector and plug

Table 22
TABLE 22
Power Supply
RPS-FGS
RPSDC-FGS
Figure 51
FIGURE 51
Brocade FastIron GS and FastIron GS-STK Hardware Installation Guide
53-1001783-01
DRAFT: BROCADE CONFIDENTIAL
Maximum Power Supply Consumption for FGS-STK Models (Continued)
lists the input connectors for the power supplies.
Input Connector for Power Supplies
Input Connector Properties
Standard IEC type (IEC 320)
C14 type: UL/CSA 15A/250V, VDE 10A/250V
Orientation: Ground pin down
2-position Phoenix Contact
The power supply is connected to Earth Ground using wire attached to the ground
stud on the power supply rear panel.
shows the power plug and connector for AC power supplies.
AC Power Cable Plug and Input Connector
Power supply specifications
Maximum Power
Consumption
121 W
170 W
161 W
204 W
1
2
6
79