Brocade Communications Systems FastIron GS Hardware Installation Manual page 103

FIGURE 59
FIGURE 60
1
4. Re-assemble the device as instructed in the section
5. Power ON the device and observe the console. The following message will appear:
6. Enable POE and configure POE parameters. Refer to the FastIron Configuration Guide for
Brocade FastIron GS and FastIron GS-STK Hardware Installation Guide
53-1001783-01
DRAFT: BROCADE CONFIDENTIAL
Figure 59 shows the location of the POE daughter card on the main board of the FGS624P-POE
or FGS624P-POE-STK device.
Installing a POE Daughter Card in the FGS624P-POE or FGS624P-POE-STK device
Figure 60 shows the location of the POE daughter cards on the main board of the
FGS648P-POE and FGS648P-POE-STK devices.
Installing a POE daughter card in the FGS648P-POE and FGS648P-POE-STK devices.
POE daughter cards
Info: PoE module detected in slot 1.
information.
Installing or replacing a POE daughter card
1
"Reassembling the
Initializing....
8
device".
93