Control Features - Brocade Communications Systems FastIron GS Hardware Installation Manual

FIGURE 3
FGS648P and FGS648P-POE models contain the following ports:
•
•
•

Control features

All FGS front panels have the following control features:
•
•
•
•
•
•
•
The following illustrations show the front panels of the FGS models.
Brocade FastIron GS and FastIron GS-STK Hardware Installation Guide
53-1001783-01
DRAFT: BROCADE CONFIDENTIAL
FGS648P and FGS648P-POE Devices
48 10/100/1000 copper ports that support 100Base-TX and 1000Base-T RJ-45 connectors
Four 100/1000 Gigabit Fiber uplink ports (1F – 4F) for mini-GBIC (SFP) MSA-compliant optical
transceivers
NOTE
Copper ports 1 – 4 and fiber ports 1F – 4F are combination ports, meaning either the copper
port or its corresponding fiber port can be active, but they cannot both be active at the same
time. You can use a combination of fiber and copper ports, or all four copper, or all four fiber
ports, as needed. For more information, refer to
Two 10 Gbps ports (optional). Refer to
Serial management interface (the port labeled Console)
Reset button
10/100/1000 ports with RJ-45 copper connectors
100/1000 ports with mini-GBIC slots for SFP MSA-compliant fiber transceivers
FGS624XGP and FGS624XGP-POE models have one 10-Gigabit Ethernet port for XFP MSA
compliant fiber connectors
Optionally, two10 Gigabit Ethernet ports for XFP MSA-compliant fiber connectors
LEDs for ports, power supplies, and stacking
X G
F G S -2
"Combination ports"
"10 Gbps ports"
Hardware features
on page 9.
on page 9.
1
5