Assembly Instructions - LifeSpan EXER-58 Owner's Manual

NOTE: Before assembly ensure there is enough space around the item. Some nuts and bolts may be already
attached to the machine
STEP 1
1. Tighten the front and rear stabilizers (2 & 3) to the main frame (1) with cap nuts (7), arc washers (6)
and carriage bolts (5).
STEP 2:
1. Tighten left and right pedals (9L/R) to the cranks (8).
2. Tighten the left pedal anti-clockwise and right pedal clockwise, as shown in picture below. Please note
that the pedals should stay tightened during movement, otherwise the threads of pedals may be
damaged.

5. ASSEMBLY INSTRUCTIONS

7
EXER-58