Caution, Warning and Danger Decals have been placed on the equipment to warn of potentially
dangerous situations. Care should be taken to keep this information intact and easy to read at all times.
Replace missing or damaged safety signs.
Using the equipment for purposes other than specified in this manual may cause personal injury and or
damage to the equipment.
Safety–Alert Symbol
This is a safety–alert symbol. When you see this symbol on your equipment, be alert to
the potential for personal injury. This equipment is designed to be installed and operated
as safely as possible...however, hazards do exist.
Signal Words
Signal words are used in conjunction with the safety–alert symbol to
identify the severity of the warning.
DANGER
........... indicates an imminently hazardous situation
WARNING
........ indicates a potentially hazardous situation
CAUTION
.......... indicates a hazardous situation which, if not
DANGER: Electrical Hazard
Disconnect electrical power before inspecting or servicing equipment
unless maintenance instructions specifically state otherwise.
Ground all electrical equipment for safety.
All electrical wiring must be done by a qualified electrician in
accordance with local and national electric codes.
Ground all non-current carrying metal parts to guard against electrical
shock.
With the exception of motor overload protection, electrical disconnects
and over current protection are not supplied with the equipment.
Tools Required for Installation
1. Regular Slotted Screwdriver
2. Wire Cutters
3. Wire Strippers
Safety Information
which, if not avoided, WILL result in death
or serious injury.
which, if not avoided, COULD result in
death or serious injury.
avoided, MAY result in minor or moderate
injury.
TM
TURBO
Fiberglass Cone and Grill Fan—36" Direct Drive
4. Adequate Electrical Wire
5. Electrical Drill & Drill Bits
6. Another person to help
DANGER
WARNING
CAUTION
5
Need help?
Do you have a question about the Turbo and is the answer not in the manual?