Hach HIAC 9705 Operator's Manual page 8

8 of 82
Only factory certified personnel should perform service of the 9705. Attempts by untrained
personnel to disassemble, alter, modify or adjust the electronics and/or hydraulics may result
in personal injury and damage to the 9705.
This instrument has been tested and found to comply with:
• EN 61326 Electro Magnetic Compatibility (EMC) EN 61010-1 Safety Requirement for
• Low Voltage Directive EN 60825-1 Safety of Laser Products
• FDA Laser Safety 21 CFR, Chapter 1, Sub-Chapter J
The following DANGER label is clearly visible on the body of the laser sensor inside the unit.
Do not disassemble or attempt to service due to the possibility of eye damage.
Although the 9705 is designed for rugged use, it is still an instrument that should be cared for
and maintained as described in this manual. Following proper safety and handling instructions
will promote accident free operation and prolong product life.
Warranty
Hach Ultra warrants that this instrument will be free of defects in materials and workmanship
for a period of one (1) year from the shipping date. If any instrument covered under this
warranty proves defective during this period, Hach Ultra will, at its option, either repair the
defective product without charge for parts and labor, or provide an equivalent replacement in
exchange for the defective product.
To obtain service under this warranty, the customer must notify the nearest Hach Ultra service
support center on or before the expiration of the warranty period and follow their instructions for
return of the defective instrument. The customer is responsible for all costs associated with
packaging and transporting the defective unit to the service support center, and must prepay
all shipping charges. Hach Ultra will pay for return shipping if the shipment is to a location within
the same country as the service support center.
This warranty shall not apply to any defect failure or damage caused by improper use or
maintenance or by inadequate maintenance or care. This warranty shall not apply to damage
resulting from attempts by personnel other than Hach Ultra representatives, or factory-
authorized and trained personnel, to install, repair or service the instrument; to damage
resulting from improper use or connection to incompatible equipment; or to instruments that
have been modified or integrated with other products when the effect of such modification or
integration materially increases the time or difficulty of servicing the instrument.
Operator Manual
WARNING
Electrical Equipment for Measurement, Control and Laboratory Use.
WARNING
Manual Overview - 9705
HIAC