9705 Components; Fluid Connections; Connecting The Drain Line; Fig 2-2 : Rear View Of 9705 - Hach HIAC 9705 Operator's Manual

14 of 82

9705 Components

2.2
Figure 2-2
Place the particle counter on a dry, level surface. Do not power up any instruments until all
electrical and communications connections are complete.

Fluid Connections

2.3
2.3.1

Connecting the Drain Line

1) Attach the drain line to the back of the unit.
2) Be sure the connection is secure before powering on the unit.
3) Place the other end of the drain line in a suitable waste-fluid receptacle.
Note:
The sensor cleaning port is located on the left side of the unit below the printer. For more
information, refer to
Operator Manual
shows the locations of connectors on the back panel of the 9705.
drain USB

Fig 2-2 : Rear View of 9705

"Sensor Port Cleaning" on page
service power
62.
Initialization - 9705
HIAC