Table 8: Status Page - Grandstream Networks GXW40XX User Manual

Reply to ICMP on WAN port
WAN side HTTP/Telnet
Access
Cloned WAN MAC Address
Enable LAN DHCP
LAN Subnet Mask
LAN DHCP Base IP
LAN DHCP Start IP
LAN DHCP End IP
DHCP IP Lease Time
DMZ IP
Port Forwarding
In addition to the Basic Settings configuration page, end users also has access to the Device Status
page.
T 8: S P
ABLE TATUS AGE
MAC Address
WAN IP Address
Product Model
Software Version
System Up Time
Grandstream Networks, Inc.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
If set to "Yes", the GXW40XX will respond to the PING. Default is No.
"Yes" setting may make the gateway vulnerable to a
Note: This option is not present on GXW4024
If set to "Yes", user can access the configuration page through the WAN port,
instead of through the "PC" port. WARNING: this configuration is less secure than
default option. Default is No.
Note: This option is not present on GXW4024
This allows you to change/set the MAC address on the WAN interface.
Note: This option is not present on GXW4024
Default is Yes.
Note: This option is not present on GXW4024
Sets the LAN subnet mask. Default value is 255.255.255.0
Note: This option is not present on GXW4024
Base IP for the LAN port which functions as a Gateway for the subnet.
Default value is 192.168.2.1.
When the device detects WAN IP is conflicting with LAN IP, the LAN base IP
address will be changed based on the network mask -- the effective subnet will be
increased by 1. For example; 192.168.2.1 will be changed to 192.168.3.1 if net
mask is 255.255.255.0. Then the device will reboot
Note: This option is not present on GXW4024
Default is 100
Note: This option is not present on GXW4024
Default is 199
Note: This option is not present on GXW4024
Value is set in units of hours. Default value is 120 hrs (5 Days.) The time IP
address is assigned to the LAN clients.
Note: This option is not present on GXW4024
Forward all WAN IP traffic to a specific IP address if no matching port is used by
GXW40XX or defined in port forwarding.
Note: This option is not present on GXW4024
Forwards a matching (TCP/UDP) port to a specific LAN IP address with a specific
(TCP/UDP) port.
Note: This option is not present on GXW4024
The device ID in hexadecimal format. This is needed for Internet Service Provider
troubleshooting. Note: there are separate MAC addresses for the WAN side and
the LAN side. The LAN MAC address will be used for provisioning and can be found
on the label on original box and on the label located on the bottom panel of the device.
Shows WAN IP address of GXW40XX
Contains the product model info.
Program: This is the main software release. Boot and Loader are not changed often.
Shows system uptime since the last reboot.
GXW40XX User Manual
Firmware 1.0.4.2
Denial of Service attack.
Page 22 of 38
Last Updated: 06/2011