Spare Parts; Ordering Data; Spare Parts Kits - Siemens SIMOTICS M-1PH8 Operating Instructions & Installation Instructions

Spare parts

10.1

Ordering data

When ordering spare parts, in addition to the precise designation of the spare part, specify the
motor type and the serial number of the motor. Ensure that the spare part designation matches
the designation in the spare part lists and add the associated part number.
Example:
Spare part
Machine type
Serial number
The machine type and the serial number are indicated on the rating plate and in the technical
data, and are also embossed on the drive end of the shaft.
Note
Bar code on rating plate
You can also read the machine type and serial number from the bar code on the rating plate.
Note
The graphics in this chapter are schematic representations of the basic versions. They are
used for spare parts definitions. The supplied version may differ in details from these
representations.
10.2

Spare parts kits

The spare parts are bundled with the necessary wearing parts in a logical way so as to create
spare parts kits. The spare parts kits for the bearings also contain the bearing grease.
The following spare parts kits are available for you to order:
3.00
4.00
32.00
55.00
Additional spare parts are available on request.
For an overview of the services available from Technical Support, please visit:
Technical Support (http://support.automation.siemens.com/WW/view/en/16605654)
SIMOTICS M-1PH8
Operating Instructions 05/2012 A5E03986435A AA
Spare parts kit, non-drive-end bearing (complete)
Spare parts kit, drive-end bearing (complete)
Spare parts kit, separately driven fan (only force-ventilated motors)
Spare parts kit, relevant version of speed encoder
Spare parts kit, drive-end bearing (Part 3.00)
1PH81841JD202FA1
N-W91246206010001
10
109