Maintenance; Qualified Personnel; Observe The Operating Instructions Of The Components - Siemens SIMOTICS M-1PH8 Operating Instructions & Installation Instructions

Maintenance

Through careful and regular maintenance, inspections, and overhauls you can detect faults at
an early stage and resolve them. This means that you can avoid consequential damage.
Operating conditions and characteristics can vary widely. For this reason, only general
maintenance intervals can be specified here. Maintenance intervals should therefore be
scheduled to suit the local conditions (dirt, starting frequency, load, etc.).
When carrying out any work on the machine, observe the general safety instructions
(Page 13) and the specifications contained in DIN EN 50110‑1 as regards working safely with
and on electrical machines.
Comply with the IEC / EN 60079‑17 standard during all servicing and maintenance work on
the machine.
Note
Service Center
Please contact the Service Center, if you require support with servicing, maintenance or
repair.
9.1

Qualified personnel

All work at the machine must be carried out by qualified personnel only. For the purpose of
this documentation, qualified personnel is taken to mean people who fulfill the following
requirements:
● Through appropriate training and experience, they are able to recognize and avoid risks
● They have been instructed to carry out work on the machine by the appropriate person
9.2

Observe the operating instructions of the components

When carrying out any maintenance and repair work, always carefully observe the
manufacturer's operating instructions for additional components.
See also
Operating instructions, external fan (Page 144)
SIMOTICS M-1PH8
Operating Instructions 05/2012 A5E03986435A AA
and potential dangers in their particular field of activity.
responsible.
9
85