Description - Siemens SIMOTICS M-1PH8 Operating Instructions & Installation Instructions

Description

Application range
The motors of the 1PH818., 1PH822., series are used as industrial drives. They have been
designed to address a wide range of drive applications exclusively fed from converters.
They are characterized by their high power density, ruggedness, long lifetime, and overall
reliability.
Type of protection Ex t
This machine has been designed according to the "constructional safety" (Ex t) type of
protection in line with IEC / EN‑60079‑0 and IEC / EN 60079‑31 . It may, therefore, be operated
in hazardous areas in the presence of non-conductive, combustible dust in Zone 22 according
to IEC / EN 60079‑10‑2 .
Explosion hazard
This machine is not designed for use in the following areas:
● Explosive gas atmospheres.
● Areas in which an explosion hazard exists due to hybrid mixtures.
● Areas with dust of explosive materials.
● Areas with pyrophoric materials.
An explosion can occur if the machine is operated in these areas. This can result in death,
serious injury or material damage.
Never operate this machine in the above mentioned areas.
Rating plate
The rating plate shows the identification data and the most important technical data. The data
on the rating plate and the contractual agreements define the limits of proper usage.
SIMOTICS M-1PH8
Operating Instructions 05/2012 A5E03986435A AA
WARNING
3
21