Siemens SIMOTICS M-1PH8 Operating Instructions & Installation Instructions page 24

Description
Figure 3-2
Drive
The motor speed is controlled using a converter.
CAUTION
Destruction of the machine when operated directly from the line supply
The machine will be destroyed if it is directly connected to the line supply. Only operate the
machine using a converter.
Types of construction
The motor is supplied with two attached lifting eyes. The type construction can be found on
the rating plate.
Vertical type of construction
For IM V5 and IM V15 types of construction with "shaft extension pointing downward", the
motor is equipped with two additional Vario eye bolts. The Vario eyebolts are in the terminal
box.
CAUTION
Protection against falling parts
For vertical types of construction, protect the air intake or discharge against falling parts, e.g.
by attaching a canopy. Otherwise the machine could be damaged.
24
Ex plate on the machine (schematic representation)
Operating Instructions 05/2012 A5E03986435A AA
SIMOTICS M-1PH8