Introduction; Content; Disposal - Siemens SIMOTICS M-1PH8 Operating Instructions & Installation Instructions

Introduction

1.1

Content

These operating instructions are valid for 1PH8 induction motors in shaft heights 180 ... 225
in the force-ventilated version.
● 1PH818.1 and 1PH818.3
● 1PH822.1 and 1PH822.3
The serial number of the motor can be found on the rating plate.
These instructions describe the machine and explain how to handle it, from initial delivery to
final disposal of the equipment. Keep these instructions for later use.
Read these operating instructions before you handle the machine and follow the instructions.
to become familiar with its design and operating principles and thus ensure safe, problem-free
machine operation and long service life.
If you have suggestions for improving the document, please contact our Service Center
(Page 123).
Text format features
The warning notice system is explained on the rear of the inside front. Always follow the safety
instructions and notices in these instructions.
In addition to the safety-related warning notices which you must read, you will find the text in
these instructions is formatted in the following way:
1. Handling instructions are always formatted as a numbered list. Always perform the steps
● Lists are formatted as bulleted lists.
Note
A Note is an important item of information about the product, handling of the product or the
relevant section of the document. Notes provide you with help or further suggestions/ideas.
SIMOTICS M-1PH8
Operating Instructions 05/2012 A5E03986435A AA
in the order given.
– Lists on the second level are hyphenated.
1
11