Chapter 2 Installation Preparation; Cautions; Safety Advice; Safety Principles - Bdcom S2210PB Hardware Installation Manual

Chapter 2

2.1 Cautions

Similar to other electronic products, the semiconductor chip easily gets damaged if
you power on and off abruptly and frequently. To restart up the switch of S2210PB, you
have to open the power on-off three or five seconds after the power is cut off.
Avoid severe collision or falling down from the height to protect the parts in the
switch.
Use correct outside ports to connect the switch of S2210PB. Do not insert the
Ethernet plug into the console port (RJ45 8-line socket). Similarly, do not insert the
console cable into the console port (RJ45 8-line socket).
Note:
1) When you plug or dial out the power line, keep the power line horizontal with the
power socket.
2) When the lifetime of our products ends, handle them according to national laws and
regulations, or send these products to our company for collective processing.

2.2 Safety Advice

2.2.1

Safety Principles

 Keep dustless and clean during or after the installation.
 Put the cover at the safe place.
 Put tools at the right place where they are not easily falling down.
 Put on relatively tight clothes, fasten the tie or scarf well and roll up the sleeve,
 Put on the protective glasses if the environment may cause damage to your
 Avoid incorrect operations that may cause damage to human or devices.
2.2.2

Safety Notices

The safety notices mentioned here means that improper operation may lead to body
damage.
 Read the installation guide carefully before you operate the system.
 Only professionals are allowed to install or replace the switch.
 Please cut off the direct-current connection when you operate the hull or work
 The final configuration of products must comply with relative national laws and
2.2.3

Safety Principles for Live Working

When you work under electricity, following the following principles:
avoiding stumbling the chassis.
eyes.
near the power supply.
regulations.
S2210PB Hardware Installation Manual
Installation Preparation
- 5 -