Forcing A Power Shutdown - NEC EXPRESS5800/180Ra-7 User Manual

Note:
control unit such as an UPS (Uninterruptible Power Supply),
refer to the UPS user's guide for proper power-off
procedures.

Forcing a Power Shutdown

A forced power shutdown can be used when the power on/off switch does not
power off the server or the reset functions do not work.
To perform a forced power shutdown:
Press in on the power on/off switch located on the front panel of the
server for at least 4 seconds to force the server power off.
To power on after a forced shutdown, wait 10 seconds and then power on again.
2-20 Setting Up the System
If the server power cord is connected to a power