Table of Contents
Advertisement
5. Remove the four processor cartridges and associated VRMs from the system
baseboard, see Removing/Installing Processor Cartridges on System
Baseboard earlier in this chapter.
6. Remove the two screws securing the CPU cage to the BSU chassis and
remove the cage, see Figure 4-16.
7. Remove the two screws securing the front fan module connector to the BSU
chassis so that it can be relocated later, see Figure 4-17.
Figure 4-17. Removing the Front Fan Module Connector Screws
4-20 Upgrading Your System
Figure 4-16. Removing the CPU Cage
Advertisement
Table of Contents
Troubleshooting
