Removing A Hard Disk Drive - NEC EXPRESS5800/180Ra-7 User Manual

11. Push the lock lever toward the hard disk drive bay till the handle is
completely locked. The lever clicks when it is locked. See Figure 4-57.
Figure 4-57. Securing Hard Disk Drive/Carrier in the System
12. Plug in the power cords and power up the system.

Removing a Hard Disk Drive

Use this procedure to remove a hard disk drive from your system.
1. Observe the safety and ESD precautions listed at the beginning of this
chapter.
2. If tower-based system, unlock (if locked) the mechanical lock at the top of
the front door and open the door.
3. Power off the system. Ensure the power cords are unplugged from the AC
wall outlet.
4. Determine which hard disk drive bay contains the hard drive you want to
remove, see Figure 4-58.
In the BSU the hard disk drive bays consist of two slots. Confirm which slot
of the hard disk drive bay the hard drive will be removed from. The SCSI ID
(0 and 1) is determined by the slot number from left to right.
In the DEU the hard disk drive bays consist of eight slots. Confirm which
slot of the hard disk drive bay the hard drive will be removed from. The
SCSI ID (0, 1, 2, 3, 8, 9, A, and B) is determined by the slot number from
left to right.
4-52 Upgrading Your System
Incorrect Correct