Forcing A Power Shutdown; Resetting The System - NEC Express5800 320La User Manual

3. Power off the peripheral devices.
Note:
control unit such as an UPS (Uninterruptible Power Supply),
refer to the UPS user's guide for proper power-off
procedures.

Forcing a Power Shutdown

A forced power shutdown can be used when the system's power on/off switch
does not power off the server or the reset functions do not work.
To perform a forced power shutdown:
Press in on the push-button power on/off switch located on the front
panel of the server for at least 4 seconds to force the server power off.
To power on after a forced shutdown, wait 10 seconds and then power on again.

Resetting the System

To do this:
Soft boot reset, which clears system memory and reloads the operating system.
Cold boot reset, which clears system memory, restarts POST, reloads the
operating system, and halts power to all peripherals.
If the server power cord is connected to a power
Press:
<Ctrl+Alt+Del>
Power off/on
Setting Up the System 2-19