NEC EXPRESS5800/180Ra-7 User Manual page 200

Table 5-3. POST Error Codes and Messages (continued)
Error Code and Message
0BB0 SMBIOS - SROM data
read error
0BB1 SMBIOS - SROM data
checksum bad
0BC0 POST detected startup
failure of CPU #1.
0BC1 POST detected startup
failure of CPU #2.
0BC2 POST detected startup
failure of CPU #3.
0BC3 POST detected startup
failure of CPU #4.
0BC4 POST detected startup
failure of CPU #5.
0BC5 POST detected startup
failure of CPU #6.
0BC6 POST detected startup
failure of CPU #7.
0BC7 POST detected startup
failure of CPU #8.
0BD0 1st SMBus device
address not
acknowledged.
0BD1 1st SMBus device Error
detected.
0BD2 1st SMBus timeout.
0BD3 2nd SMBus device
address not
acknowledged.
0BD4 2nd SMBus device Error
detected.
0BD5 2nd SMBus timeout.
0BD6 3rd SMBus device
address not
acknowledged.
0BD7 3rd SMBus device Error
detected.
0BD8 3rd SMBus timeout.
0BD9 4th SMBus device
address not
acknowledged.
5-34 Problem Solving
Description
Read error of SROM data
Checksum for the SROM data
is incorrect.
CPU #1 failed to startup.
CPU #2 failed to startup.
CPU #3 failed to startup.
CPU #4 failed to startup.
CPU #5 failed to startup.
CPU #6 failed to startup.
CPU #7 failed to startup.
CPU #8 failed to startup.
No response was made to the
access to the 1st SMBus.
An error was detected in the
access to the 1st SMBus.
A timeout error occurred in the
access to the 1st SMBus.
No response was made to the
access to the 2nd SMBus.
An error was detected in the
access to the 2nd SMBus.
A timeout error occurred in the
access to the 2nd SMBus.
No response was made to the
access to the 3rd SMBus.
An error was detected in the
access to the 3rd SMBus.
A timeout error occurred in the
access to the 3rd SMBus.
No response was made to the
access to the 4th SMBus.
Action
Contact your service representative.
Contact your service representative to
replace the failed CPU.
Contact your service representative to
replace the board indicated in the
system event log.