Table of Contents
Advertisement
5. While holding the front bezel pull forward to remove it.
Installing the Front Bezel
You must first install the top cover in order to install the front bezel on your
BSU. See Installing the BSU Top Cover later in this chapter.
To install the front bezel, perform the following (see Figure 4-5):
1. Make sure no tools or loose parts have been left inside the BSU.
2. Make sure that all interior cables are properly connected.
3. Align the five thumbscrews of the bezel with their respective holes on the
front of the BSU.
4. Adjust the position of the bezel so that its square hole is directly over the
CD-ROM tray and doesn't interfere with any movement of the tray.
5. Secure the bezel to the front of the BSU chassis with its five thumbscrews.
4-10 Upgrading Your System
Figure 4-5. Removing the Front Bezel
Advertisement
Table of Contents
Troubleshooting
