NEC EXPRESS5800/180Ra-7 User Manual page 231

Table D-1. ROMPilot BIOS Error Codes (continued)
Error Codes Error Messages
Error Codes from Connection Manager (CONMNGR.PLM)
18 Failed to register interface with RPC.
19 Protocol stack not bound to ODI driver.
1A Unable to create thread.
1B RomPilot shutdown for transition to DOS.
1C RomPilot forced to shutdown by BIOS.
Error Codes from Export of NV Install Data (EXPVARS.PLM)
Unable to allocate memory below 1MB.
20
21 Phoenix Dispatch Manager call to read NV install data failed.
22 Unable to allocate memory above 1MB.
23 Failed to export symbol.
24 Version mismatch between RomPilot and NV install data.
25 NV install data is marked as incomplete.
26 NV install data is missing RomPilot signature.
27 NV install data failed checksum.
Error Codes from Link Support Layer (LSL.PLM)
28 LSL initialization failed.
Error Codes from Media Support Layer (MSM.PLM)
30 Unable to register shutdown function.
31 Network card not initialized.
32 Appropriate board not found.
Error Codes from Protocol Stack (PSTACK.PLM)
38 IP address is already in use.
ROMPilot BIOS Error Codes D-3